GE GFD14ESSNWW front-load electric dryer
- Category
- Dryers
- Model number
- GFD14ESSNWW
- Region
- United States
- Verified
- Rating label
- On the inside front face of the dryer compartment, on the left or right side, with the door open. Source: support page
- Clean Filter
- Low Air
- Dryer shakes or makes noise
- Clothes take too long to dry
- The Dry dryness level was chosen but the load is still damp
- Control buttons do not respond
- Dryer does not start
- Dryer does not heat
- Clean Lint Filter message is displayed
- Drying times are inconsistent
- Clothes are still wet and the dryer shuts off after a short time
- Clothes are wrinkled
- Clothes shrink
- Greasy spots on clothes
- Lint on clothes
- Static occurs
- Collars and waistbands are still wet at the end of the cycle
- Dryer continues to tumble after the display says Complete
- How to clean the lint filter
- How to lock or unlock the controls
- How to set a Timed Dry cycle
- How to save a My Cycle setting
Nothing on this page matches. Search all models
Indicator lights
| Indicator | Meaning | Checks |
|---|---|---|
| Clean Filter | Time to clean the lint filter. | Checks |
| Low Air | Dryer performance has decreased and the risk of lint accumulating in the ducts and the dryer has increased. | Checks |
GE Appliances codes on other models
Clean Filter
Clean Filter light on. Time to clean the lint filter.
- Clean the lint filter. See Clean the lint filter.
Source Source: Using the Dryer: Display and Status Lights, p. 7
Low Air
Low Air light on. Dryer performance has decreased and the risk of lint accumulating in the ducts and the dryer has increased.
- Clean the lint filter. See Clean the lint filter.
Source Source: Using the Dryer: Display and Status Lights; Care and Cleaning: Lint Filter, pp. 7, 9
Problems
- Dryer shakes or makes noiseSome shaking and noise is normal, or the dryer is sitting unevenly.
- Clothes take too long to dry8 causes in the manual. First: the ducting is improper or obstructed.
- The Dry dryness level was chosen but the load is still damp3 causes in the manual. First: the load mixes heavy and light fabrics.
- Control buttons do not respond3 causes in the manual. First: the controls were accidentally put in service mode.
- Dryer does not start4 causes in the manual. First: the control panel is asleep. This is normal.
- Dryer does not heatA fuse is blown or a circuit breaker is tripped. The dryer may tumble but not heat when only one fuse is blown or one breaker is tripped.
- Clean Lint Filter message is displayedThe Power button was activated.
- Drying times are inconsistent2 causes in the manual. First: the load size, types of fabric, wetness of clothes and the condition of the lint filter or the air intake vent on the front of the dryer affect drying times.
- Clothes are still wet and the dryer shuts off after a short time4 causes in the manual. First: the door was opened mid-cycle, the load was removed and a new load was put in without selecting a new cycle.
- Clothes are wrinkled3 causes in the manual. First: the clothes were overdried.
- Clothes shrinkSome fabrics shrink when washed, and others can be washed safely but shrink in the dryer.
- Greasy spots on clothes3 causes in the manual. First: fabric softener was used improperly.
- Lint on clothes5 causes in the manual. First: the lint filter is full.
- Static occurs3 causes in the manual. First: no fabric softener was used.
- Collars and waistbands are still wet at the end of the cycleThe dryness monitor senses that the body of the clothes is dry.
- Dryer continues to tumble after the display says CompleteExt Tumble was selected.
Dryer shakes or makes noise
Some shaking and noise is normal, or the dryer is sitting unevenly. Source: Troubleshooting Tips, p. 28
- Move the dryer to an even floor space, or adjust the leveling legs until it is even.
Dryer does not heat
A fuse is blown or a circuit breaker is tripped. The dryer may tumble but not heat when only one fuse is blown or one breaker is tripped. Source: Troubleshooting Tips, p. 29
- Check the building's fuse or circuit breaker box and replace both fuses or reset both breakers.
Clean Lint Filter message is displayed
The Power button was activated. Source: Troubleshooting Tips, p. 29
- Press Start/Pause to begin a dry cycle and the message disappears.
Clothes shrink
Some fabrics shrink when washed, and others can be washed safely but shrink in the dryer. Source: Troubleshooting Tips, p. 30
- Follow garment care labels exactly. Some items may be pressed back into shape after drying.
- If you are concerned about shrinkage in a particular item, do not machine wash or tumble dry it.
Collars and waistbands are still wet at the end of the cycle
The dryness monitor senses that the body of the clothes is dry. Source: Troubleshooting Tips, p. 30
- Choose Quick Dry or Time Dry to dry damp collars and waistbands. For a later load with collars and waistbands, choose More Dry.
Dryer continues to tumble after the display says Complete
Ext Tumble was selected. Source: Troubleshooting Tips, p. 30
- Make sure the Ext Tumble option is not selected.
No numbers are displayed during the cycle, only lights
The dryer is continuously monitoring the amount of moisture in the clothes. When it senses a low level of moisture, it displays the dry time remaining. Source: Troubleshooting Tips, p. 28
Time Remaining jumped to a lower number
The estimated time may change when a smaller load than usual is drying. Source: Troubleshooting Tips, p. 29
Cannot make a selection and the dryer beeps twice
The dryness Level, Temp or option you are trying to select is incompatible with the chosen dry cycle. This is normal. Source: Troubleshooting Tips, p. 29
The dryer is running but 00 is displayed in Time Remaining
The Ext Tumble option was chosen. The time remaining is not displayed during extended tumbling, which lasts approximately 60 minutes. Source: Troubleshooting Tips, p. 29
Glow at the rear of the drum
The heaters behind the drum can show a glow under certain drying conditions and room lighting. This is normal. Source: Troubleshooting Tips, p. 29
How-to
- How to clean the lint filterBefore each use, and when the Clean Filter light is on.
- How to lock or unlock the controlsTo stop children starting the dryer by touching pads, or when buttons do not respond because the controls are locked. The Power button still works when the controls are locked.
- How to set a Timed Dry cycleTo dry for a time and temperature you choose.
- How to save a My Cycle settingTo store a favorite combination of settings for one-touch recall.
Maintenance
| Task | When | Source |
|---|---|---|
| Clean the lint filter | Before each use | Source: Care and Cleaning: Lint Filter, p. 9 |
| Inspect and clean the exhaust ducting to prevent clogging, and check that the flaps of the exhaust hood move freely and no wildlife is nesting in the duct or hood | At least once a year | Source: Care and Cleaning: Interior and Duct, p. 9 |
| Clean the interior of the dryer and the exhaust duct (professional service) | Once a year | Source: Care and Cleaning: Interior and Duct, p. 9 |
| Wipe or dust spills and washing compounds from the exterior with a damp cloth. Apply laundry pretreatment soil and stain removers away from the dryer, because they can damage the control panel and finishes. | Source: Care and Cleaning: Exterior, p. 9 | |
| Clean the dry sensor with a moist cloth if the load is still damp after the chosen dryness level | Source: Troubleshooting Tips, p. 28 |
Settings
| Setting | Options | Default | Notes | Source |
|---|---|---|---|---|
| Temp / Level Lock | Press and hold the Temp and Level buttons together for 3 seconds | Locks the selections, and can be set after a cycle has started. The Power button still works. | Source: Using the Dryer: Temp / Level Lock, p. 7 | |
| Signal | On, Off. Press and hold the Level and Damp Alert buttons together for 3 seconds to turn it off. | When the light is on, the dryer beeps at the end of the cycle and every time you press a button. | Source: Using the Dryer: Signal, p. 7 | |
| Level | Ex Dry, Dry, Damp | The sensor stops the dryer when the clothes reach the selected level. Usable with all cycles except Timed Dry, Air Fluff, Rack Dry, Warm Up and Dewrinkle. Dry is the preferred level for energy saving. | Source: Using the Dryer: Level, p. 6 | |
| Temp | High, Medium, Low, No Heat | High for regular to heavy cottons. Medium for synthetics, blends and permanent press. Low for delicates, synthetics and tumble dry low items. No Heat only with Air Fluff and Timed Dry. | Source: Using the Dryer: Temp (Temperature), p. 5 | |
| Damp Alert | On, Off | Beeps when clothes have dried to a damp level while the dryer continues to dry. | Source: Using the Dryer: Damp Alert, p. 6 | |
| eDry | On, Off | On for Cottons | On some models. Reduces the total energy use of specific cycles, and changes the cycle time. Usable with Mixed Loads, Cottons, Heavy Duty, Towels, Casuals, Active Wear and Delicates. | Source: Using the Dryer: eDry, p. 6 |
| Extended Tumble | On, Off | Adds no-heat tumbling after the clothes are dry, to minimize wrinkles. The manual gives approximately 2 hours in the Extended Tumble description and approximately 60 minutes in the troubleshooting table. The time is not added to the cycle time on the display, which shows END. | Source: Using the Dryer: Extended Tumble, pp. 6, 29 | |
| Delay Dry | 1 hour steps | Delays the start of the cycle. Press Start/Pause to start the countdown. If the door is opened during the delay, the countdown does not restart until the door is closed and Start/Pause is pressed again. | Source: Using the Dryer: Delay Dry, p. 7 | |
| Drum lamp | Automatic | Turns on when the door is opened and stays on for 2 minutes. After the door is closed it stays on for 30 seconds. | Source: Care and Cleaning: Drum Lamp, p. 10 |
Specifications
Front-loading electric dryer, 4.3 cu. ft., with 13 dry cycles including Sanitize and Rack Dry, sensor Level control, Damp Alert, Delay Dry and My Cycle. Source: Dimensions and installation information; Features and benefits, pp. 1, 4
The Clean Filter light means it is time to clean the lint filter. The Low Air light means dryer performance has decreased and lint is more likely to build up in the ducts and the dryer. Source: Using the Dryer: Display and Status Lights, p. 7
Clean the lint filter before each use, and have the exhaust duct inspected and cleaned at least once a year. A partially clogged exhaust lengthens the drying time. Source: Care and Cleaning, p. 9
| Capacity | 4.3 cu. ft. | Source: Dimensions and installation information, p. 1 |
|---|---|---|
| Electric rating | 240 V, 2800 W, 12 A, 60 Hz | Source: Dimensions and installation information, p. 1 |
| Circuit requirement | An individual, properly grounded branch circuit protected by a 30-amp circuit breaker or time-delay fuse. The wall outlet must be within 36 inches of the service cord entry. | Source: Dimensions and installation information, p. 1 |
| Drying rack accessory | WE01X26416 | Source: Using the Dryer: Loading, Drying Rack, p. 8 |
| Drum lamp replacement bulb | WE11X26351, or appliance bulb 7C7, on models with a domed cover secured by a screw | Source: Care and Cleaning: Drum Lamp, p. 10 |
| Model and serial number location | On the label on the front of the dryer, behind the door | Source: Cover, p. 1 |
Recalls
No exact-model match for GFD14ESSNWW in the U.S. Consumer Product Safety Commission recall database, checked . Recalls can name model families, so also check current recalls for GE Appliances.
Service contact
GE Appliances: 800.626.2005, geappliances.com/service. United States. Source: Consumer Support, p. 32
Sources
- Owner's Manual & Installation Instructions, Dryers GFD14. GE Appliances, a Haier company. Document 49-3000087, revision Rev 7, 2026-09, 96 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
- Quick Specs, GFD14ESSNWW 4.3 Cu.Ft. Capacity Electric Dryer. GE Appliances. Document GFD14ESSNWW, revision Quick Specs, 4 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.
All GE Appliances handbooks. Report an error to hello@modelhandbook.com.