GE Appliances GFD14ESSNWW clothes take too long to dry
Cause 1 of 8The ducting is improper or obstructed. Source: Troubleshooting Tips, p. 28
First checkCheck the Installation Instructions to make sure the dryer venting is correct.
Causes and checks
The ducting is improper or obstructed. Source: Troubleshooting Tips, p. 28
- Check the Installation Instructions to make sure the dryer venting is correct.
- Make sure the ducting is clean, free of kinks and unobstructed.
- Check that the outside wall damper operates easily.
The load is not sorted. A well-sorted washer load is generally a well-sorted dryer load. Source: Troubleshooting Tips, p. 28
- Separate heavy items from lightweight items.
The load is large and made of heavy fabrics such as beach towels, which hold more moisture. Source: Troubleshooting Tips, p. 28
- Separate large, heavy fabrics into smaller loads.
The controls are not set for the load. Source: Troubleshooting Tips, p. 28
- Match the control settings to the load you are drying.
The lint filter is full. Source: Troubleshooting Tips, p. 28
- Clean the lint filter before every load. See Clean the lint filter.
A fuse is blown or a circuit breaker is tripped. Source: Troubleshooting Tips, p. 28
- Replace the fuses or reset the circuit breakers. Since most dryers use 2 fuses or breakers, make sure both are working.
Loads are combined or the dryer is overloaded. Source: Troubleshooting Tips, p. 28
- Do not put more than one washer load in the dryer at a time.
The dryer is underloaded. Source: Troubleshooting Tips, p. 28
- If you are drying only one or two items, add a few items so the load tumbles properly.
All 8 causes checked. Contact GE Appliances: 800.626.2005.
Service
If the checks above do not clear it, contact GE Appliances: 800.626.2005, geappliances.com/service. United States. Source: Consumer Support, p. 32
Other GFD14ESSNWW problems
- Dryer shakes or makes noiseSome shaking and noise is normal, or the dryer is sitting unevenly.
- The Dry dryness level was chosen but the load is still damp3 causes in the manual. First: the load mixes heavy and light fabrics.
- Control buttons do not respond3 causes in the manual. First: the controls were accidentally put in service mode.
- Dryer does not start4 causes in the manual. First: the control panel is asleep. This is normal.
- Dryer does not heatA fuse is blown or a circuit breaker is tripped. The dryer may tumble but not heat when only one fuse is blown or one breaker is tripped.
- Clean Lint Filter message is displayedThe Power button was activated.
- Drying times are inconsistent2 causes in the manual. First: the load size, types of fabric, wetness of clothes and the condition of the lint filter or the air intake vent on the front of the dryer affect drying times.
- Clothes are still wet and the dryer shuts off after a short time4 causes in the manual. First: the door was opened mid-cycle, the load was removed and a new load was put in without selecting a new cycle.
- Clothes are wrinkled3 causes in the manual. First: the clothes were overdried.
- Clothes shrinkSome fabrics shrink when washed, and others can be washed safely but shrink in the dryer.
- Greasy spots on clothes3 causes in the manual. First: fabric softener was used improperly.
- Lint on clothes5 causes in the manual. First: the lint filter is full.
- Static occurs3 causes in the manual. First: no fabric softener was used.
- Collars and waistbands are still wet at the end of the cycleThe dryness monitor senses that the body of the clothes is dry.
- Dryer continues to tumble after the display says CompleteExt Tumble was selected.
Sources
- Owner's Manual & Installation Instructions, Dryers GFD14. GE Appliances, a Haier company. Document 49-3000087, revision Rev 7, 2026-09, 96 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
- Quick Specs, GFD14ESSNWW 4.3 Cu.Ft. Capacity Electric Dryer. GE Appliances. Document GFD14ESSNWW, revision Quick Specs, 4 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.