GE Appliances dishwashers
2 models. All GE Appliances models. GE Appliances error codes
Problems and error codes
- GE Appliances GDF535PSRSS dishes and flatware are not clean7 causes in the manual. First: the Ultra-Fine Filter assembly or the Fine Filter is clogged.
- GE Appliances GDF535PSRSS spots and filming on glasses and flatware6 causes in the manual. First: the water is extremely hard.
- GE Appliances GDF535PSRSS cloudiness on glassware2 causes in the manual. First: soft water combined with too much detergent causes etching, which is permanent.
- GE Appliances GDT645SYNFS dishwasher won't start or run4 causes in the manual. First: the Start sequence was not followed. The cycle starts only if the door is closed within 4 seconds of pressing Start.
- GE Appliances GDT645SYNFS controls respond but the dishwasher never fills with water3 causes in the manual. First: the door is not completely closed.
- GE Appliances GDT645SYNFS water left in the bottom of the tub or not pumping out2 causes in the manual. First: the air gap is clogged, or the drain loop or air gap was not installed as the installation instructions require.
Models
- GDF535PSRSS
- GDT645SYNFS