JURA E8 (ED) how to dismantle and rinse the fine foam frother
About once a week, and when foam is poor or milk sprays.
Steps
- Remove the milk pipe and rinse it under running water.
- Remove the fine foam frother and take it apart.
- Rinse the parts under running water. For dried-on milk, first soak them in 250 ml of water with one dose of JURA milk system cleaner.
- Reassemble the frother firmly and refit it.
Source: 7 Maintenance: Dismantling and rinsing the fine foam frother Source: 7 Maintenance: Dismantling and rinsing the fine foam frother, pp. 17–18
Used for
Other E8 (ED) procedures
- How to descale the E8When ‘Descaling’ appears in the Cockpit. Takes about 20 minutes; do not interrupt it.
- How to insert or change the CLARIS Smart+ filterWhen the filter symbol lights red or ‘Filter’ shows in the Cockpit.
- How to run the cleaning programmeWhen ‘Cleaning’ appears in the Cockpit (after 180 preparations or 80 switch-on rinses). Takes about 20 minutes; do not interrupt it.
- How to clean the milk systemDaily when milk has been prepared, or when ‘Milk system cleaning’ appears.
- How to descale the water tankFrom time to time, when limescale forms in the tank.
Sources
- Instructions for Use, E8 (ED/SD/INTD) (English). JURA Elektroapparate AG. Document E8(D)/en, revision 20250918_BA-Online, 2025-09-18, 25 pages, en. jura.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.