Jura e8 filter
When the filter symbol lights red or ‘Filter’ shows in the Cockpit.
You need
- CLARIS Smart+ filter cartridge
Steps
- Remove and empty the water tank.
- Turn the old cartridge anticlockwise and lift it out with its extension.
- Fit the extension onto a new CLARIS Smart+ cartridge.
- Put the cartridge into the tank and turn it clockwise until it clicks.
- Fill the tank with fresh cold water and refit it. The machine detects the new filter and rinses it into the drip tray.
Source: 7 Maintenance: Inserting/changing the filter Source: 7 Maintenance: Inserting/changing the filter, p. 18
Used for
- Filter: The CLARIS Smart+ filter cartridge is used up.
Other E8 (ED) procedures
- How to descale the E8When ‘Descaling’ appears in the Cockpit. Takes about 20 minutes; do not interrupt it.
- How to run the cleaning programmeWhen ‘Cleaning’ appears in the Cockpit (after 180 preparations or 80 switch-on rinses). Takes about 20 minutes; do not interrupt it.
- How to clean the milk systemDaily when milk has been prepared, or when ‘Milk system cleaning’ appears.
- How to dismantle and rinse the fine foam frotherAbout once a week, and when foam is poor or milk sprays.
- How to descale the water tankFrom time to time, when limescale forms in the tank.
Sources
- Instructions for Use, E8 (ED/SD/INTD) (English). JURA Elektroapparate AG. Document E8(D)/en, revision 20250918_BA-Online, 2025-09-18, 25 pages, en. jura.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.