HP M234dw how to connect the printer to Wi-Fi with HP Smart

For first setup, after switching Wi-Fi off, or after restoring network settings.

Steps

  1. Join your computer or mobile device to your Wi-Fi network; on a mobile device switch on Bluetooth and location services.
  2. Turn the printer Wi-Fi on if it was off.
  3. Restore the network settings if the printer is not in wireless setup mode. See Restore network settings to default.
  4. Launch the HP Smart app.
  5. Tap the Plus icon or Add Printer and pick the printer, allowing Bluetooth and location access if asked.
  6. Follow the app's prompts to add the printer to the network.
  7. Create an HP account and register the printer if prompted.

When the connection succeeds, the Wireless light stops blinking and stays lit.

Source: Connect your printer to a Wi-Fi network using HP Smart Source: Connect your printer to a Wi-Fi network using HP Smart, p. 13

Used for

Other M234dw procedures

Sources

  1. User Guide, HP LaserJet MFP M232-M237 series. HP Development Company, L.P. Document c06759742, revision UG_EN (PDF created 2020-12-02), 154 pages, en. h10032.www1.hp.com (PDF). Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
M234dw (variants M234dwe; M234sdw; M234sdwe). Worldwide.
Source
User Guide, HP LaserJet MFP M232-M237 series, c06759742 revision UG_EN (PDF created 2020-12-02)
Last verified
Handbook
HP LaserJet MFP M234dw printer in Printers; all HP handbooks