HP M209dw blue bar pulses, then flashes amber
Status light bar pulses solid blue, then flashes amber. The printer cannot connect to a wireless network.
CauseThe wireless connection failed. Source: Interpret control-panel light patterns: Table 7-4 Blue; Solve wireless network problems, p. 43
First checkCheck that the printer and the wireless router are on and that the printer's wireless radio is on.
Causes and checks
The wireless connection failed. Source: Interpret control-panel light patterns: Table 7-4 Blue; Solve wireless network problems, p. 43
- Check that the printer and the wireless router are on and that the printer's wireless radio is on.
- Print an information report with the Information button and compare its SSID with your network name.
- Run the wireless setup again if the SSID or the security information is wrong.
- Print a Wireless Network Test Report to see the diagnostic results. See Print a Wireless Network Test Report.
Service
If the checks above do not clear it, contact HP Customer Support, hp.com/support. Telephone numbers by country are on the flyer in the box or at www.hp.com/support. Source: Customer support, p. 104
Other M209dw indicators
- Solid white bar: The printer is idle and is not connected to a wireless network.
- Flashing white bar: The printer is processing and printing a job.
- White light in the center of the bar: The printer is in sleep mode.
- Solid amber bar: The cartridge access door or the rear access door might not be closed properly.
- Amber bar with the Paper light blinking: The input tray is out of paper or loaded wrongly, or paper is jammed.
- Amber bar with the Cartridge light blinking: The cartridge is very low or has an error such as incompatible, unauthorized or protected.
- Fast-flashing amber bar: The printer has encountered a problem.
- Solid blue bar: The printer is idle and connected to a wireless network, or a computer or mobile device is connected directly with Wi-Fi Direct.
- Pulsing blue bar: The printer is trying to connect to a wireless network.
- Solid green bar: The printer is initializing, waiting for confirmation, running automatic cleaning, downloading and installing a printer update, or cooling down.
- Pulsing green bar: The printer is performing routine maintenance.
- Pulsing purple bar: The printer is in wireless setup mode.
- Purple bar blinks fast, then flashes amber: Time is running out for Wi-Fi Protected Setup (WPS) mode.
- Cartridge light on: The cartridge is low on toner.
- Cartridge light blinking: The cartridge is very low, or a cartridge problem has occurred.
- Paper light blinking: The input tray is out of paper, or a paper error has occurred.
- Information button lit or blinking: A printer error has occurred.
- Information button blinking during wireless setup: The printer is waiting for you to complete authorization.
- Resume light on: The printer needs attention.
- Wireless light on, off or blinking: On: the printer has a stable wireless connection. Blinking: wireless setup mode or WPS is in progress, or the printer is not connected to a network.
- Cartridge is unauthorized: Cartridge Policy is on and the installed cartridge is not a genuine HP cartridge.
- Cartridge is protected: Cartridge Protection tied the installed cartridge to another printer or fleet, so this printer will not print with it.
Sources
- User Guide, HP LaserJet M207-M212 series. HP Development Company, L.P. Document c06977277, revision EN-WW (PDF created 2020-12-03), 133 pages, en. h10032.www1.hp.com (PDF). Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.