Epson ET-4850 printer cannot connect to the wireless router
Cause 1 of 5WPS was not completed in time. Source: Product Cannot Connect to a Wireless Router or Access Point, p. 267
First checkIf you connect with WPS and the Wi-Fi icon is not lit, select a WPS option on the control panel within 2 minutes of pressing the WPS button on the router.
Causes and checks
WPS was not completed in time. Source: Product Cannot Connect to a Wireless Router or Access Point, p. 267
- If you connect with WPS and the Wi-Fi icon is not lit, select a WPS option on the control panel within 2 minutes of pressing the WPS button on the router.
Range, band or interference stops the signal. Source: Product Cannot Connect to a Wireless Router or Access Point, pp. 267-268
- Place the product within range of your 2.4 GHz router or access point, away from microwave ovens, 2.4 GHz cordless phones and large metal objects.
- For a 5 GHz router, set dual band (2.4 GHz and 5 GHz) and give each band its own network name, for example Home Network 2.4 GHz and Home Network 5 GHz.
- Turn off the devices, wait about 10 seconds, then turn them on in this order: wireless router, computer or smart device, product. Move the product and device nearer the router and repeat the network setup.
The router settings block the product. Source: Product Cannot Connect to a Wireless Router or Access Point, p. 268
- Check that the router works by connecting another device to it.
- Print a network connection report and check its codes. See Print a network connection report.
- Disable the firewall and anti-virus software on the router or access point if necessary.
- Restart the router.
- With MAC address filtering, add the product's MAC address (printed on a network status sheet) to the router's list.
- If the router hides its SSID, enter the network name manually.
- Enter the exact WEP key or WPA passphrase.
- Check that your computer is not restricting the wireless channels, and use a usable channel.
The IP address is 169.254.XXX.XXX with the subnet mask 255.255.0.0, so it may not be assigned correctly. Source: Product Cannot Connect to a Wireless Router or Access Point, p. 268
- Check the IP address and subnet mask of the product.
- Restart the router.
- Or reset the product's network settings. See Reset the network settings.
A Wi-Fi Direct connection suddenly drops. Source: Product Cannot Connect to a Wireless Router or Access Point, p. 268
- Delete the DIRECT-xxxxxxxx connection settings on your device and enter a new password, because the Wi-Fi Direct password on the device may have changed.
All 5 causes checked. Contact Epson America technical support: (562) 276-4382.
Service
If the checks above do not clear it, contact Epson America technical support: (562) 276-4382, epson.com/support. United States, 6 AM to 8 PM Pacific Time, Monday through Friday, and 7 AM to 4 PM Pacific Time, Saturday. Canada: (905) 709-3839, same hours (epson.ca/support). Source: Where to Get Help, p. 310
Other ET-4850 problems
- Printer does not turn on or off2 causes in the manual. First: the product does not power on.
- Noise after filling the ink tanks2 causes in the manual. First: the product charges its print head the first time the tanks are filled; the power light flashes until it finishes.
- Message asks to reset ink levelsThe LCD screen asks for an ink level reset. It can appear even when ink remains in the tanks.
- Printout is faint or has gaps5 causes in the manual. First: nozzles are clogged.
- White or dark lines across the printout5 causes in the manual. First: nozzles are clogged or the head is misaligned.
- Printout is blurry or smeared6 causes in the manual. First: the paper is unsuitable or loaded wrongly.
- Printout is grainy3 causes in the manual. First: the paper faces the wrong way, or quality settings are low.
- Printout colours are wrong3 causes in the manual. First: software settings alter the colour.
- Blank pages print2 causes in the manual. First: the paper size setting is wrong or the document has a blank page.
- Printout is slanted2 causes in the manual. First: loading, paper or settings are wrong.
- Border appears on borderless prints2 causes in the manual. First: paper or driver setting does not allow borderless printing.
- Margins on the printout are wrongPaper size, margins or loading are wrong.
- Incorrect characters print2 causes in the manual. First: A cable, USB hub, spooler or sleep state disturbs the job.
- Image size or position is wrong2 causes in the manual. First: settings or loading are wrong.
- Printed image is invertedA mirror setting is on.
- Too many copies printThe Copies setting is above one.
- Nothing prints3 causes in the manual. First: the product is off, disconnected or offline.
- Printer icon is missing from the Windows taskbarThe Status Monitor shortcut is off.
- Printing is slow3 causes in the manual. First: the product slowed itself to protect the print mechanism after long printing.
- Paper does not feed or several sheets feed at once4 causes in the manual. First: the cassette or paper stack is wrong.
- Originals do not feed from the automatic document feederThe originals or their loading do not suit the ADF.
- Paper does not eject fully or comes out wrinkled2 causes in the manual. First: the paper size setting is wrong.
- Network software cannot find the printer2 causes in the manual. First: epsonNet Setup cannot find the product.
- Printer does not appear in the Mac printer windowThe product needs a restart, a WPS window was missed, or software is incomplete.
- Wireless connection is unstable on a MacA device on a Mac USB 3.0 port interferes with wireless.
- Wired network connection is unstable or slowThe router or access point supports IEEE 802.3az (Energy Efficient Ethernet), which can make the connection unstable or slow.
- Cannot print over a network2 causes in the manual. First: product, driver or settings are wrong.
- Cannot scan over a networkSoftware, firewall or resolution blocks the scan.
- Printer makes noise but nothing copiesNozzles are clogged, software is wrongly installed or the product is tilted.
- Copies have faint or wrong colours2 causes in the manual. First: nozzles, glass, ADF or paper cause the problem.
- Copy position, size or margins are wrongThe original, paper or copy settings are wrong.
- Product software will not installCable, other programs, privileges or system requirements interfere.
- Scanning software does not work or Epson Scan 2 will not startComputer, power mode or settings stop scanning.
- Scanning is slowThe resolution is high or the computer is short of resources.
- Cannot send scans to a cloud serviceThe computer, login or service is unavailable.
- Scanned image shows only dots, a line of dots or crooked linesThe original is wrongly placed or the glass is dirty.
- Scanned image is blurry, too dark or shows the back of the original2 causes in the manual. First: movement, pressure or settings affect the image.
- Characters are not recognised in a scan converted to editable textOriginal, language or scan settings are unsuitable for OCR.
- Scanned image edges are cropped, patchy or show ripples3 causes in the manual. First: the original sits too near the glass edge.
- Cannot send or receive faxes2 causes in the manual. First: the line, cable or settings are wrong.
- Cannot receive faxes with a telephone connectedThe telephone is on the wrong port or Receive Mode is wrong.
- Fax memory full error2 causes in the manual. First: received faxes fill the inbox, which holds up to 100 faxes.
- Fax quality is poor2 causes in the manual. First: A received fax is poor.
- Sent fax arrives in the wrong sizeThe original is wrongly placed or the glass is dirty.
- Received fax is not printedA product error such as a paper jam blocks printing, or the faxes are saved in memory.
Sources
- User's Guide, ET-4850. Epson America, Inc. Document CPD-60205, revision CPD-60205R1, 333 pages, en-US. files.support.epson.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.