Samsung washer ub code

Check the spinning process. The load may not be balanced inside the drum.

Cause 1 of 2The load is not balanced in the drum. Source: Troubleshooting: Information codes, p. 56

First checkCheck the drum and make sure the load is balanced.

Causes and checks

  1. The load is not balanced in the drum. Source: Troubleshooting: Information codes, p. 56

    1. Check the drum and make sure the load is balanced.
    2. Press Start/Pause (Hold to Start) to resume, or power the washer off, wait 2-3 minutes, power it on, and try again.
  2. The washer is not level or not on a flat, stable surface. Source: Troubleshooting: Information codes, p. 56

    1. Make sure the unit is level.
    2. Make sure the washer is on a flat, stable surface.

Service

If the checks above do not clear it, contact Samsung Customer Service: 1-800-SAMSUNG (726-7864), samsung.com/us/support/. United States. Source: Limited warranty (U.S.A.): contact details, p. 62

Other WF45T6000AW codes

Sources

  1. User manual, Washer WF45T6000A*. Samsung Electronics America, Inc. Document DC68-04006R-07, revision 07, 204 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WF45T6000AW (variant WF45T6000AW/A5). United States and Canada.
Source
User manual, Washer WF45T6000A*, DC68-04006R-07 revision 07
Last verified
Handbook
Samsung WF45T6000AW front-load washer in Washers; all Samsung handbooks