Samsung washer 5c code
Check the drain system.
Cause 1 of 2The drain filter is clogged. Source: Troubleshooting: Information codes; Maintenance: Drain filter, pp. 55, 45-46
First checkClean the drain filter, and then restart the washer.
Causes and checks
The drain filter is clogged. Source: Troubleshooting: Information codes; Maintenance: Drain filter, pp. 55, 45-46
- Clean the drain filter, and then restart the washer. See Clean the drain filter.
The drain hose is kinked, frozen or obstructed, or the drain it connects to is clogged. Source: Troubleshooting: Checkpoints, p. 51
- Make sure the drain hose is neither kinked nor obstructed all the way to the drain system, and that it is not frozen.
- Make sure the drain hose is connected to a drain system that is not clogged.
Samsung Customer Service If there is a drain restriction, call for service. Contact: 1-800-SAMSUNG (726-7864) or samsung.com/us/support/.
All 2 causes checked. Contact Samsung Customer Service: 1-800-SAMSUNG (726-7864).
Service
If the checks above do not clear it, contact Samsung Customer Service: 1-800-SAMSUNG (726-7864), samsung.com/us/support/. United States. Source: Limited warranty (U.S.A.): contact details, p. 62
Other WF45T6000AW codes
- 1C: Check the water level sensor. On some models the washer drains automatically while the code shows, and the Power and Start/Pause (Hold to Start) buttons may not respond.
- DC: The door is open.
- DC1: The door switch needs checking.
- LC: Check for water leaks. On some models the washer drains automatically while the code shows, and the Power and Start/Pause (Hold to Start) buttons may not respond.
- 4C: Check the water supply line. On some models the washer drains automatically while the code shows, and the Power and Start/Pause (Hold to Start) buttons may not respond.
- 4C2: The water supplied is too hot for the laundry.
- HC: The washing heater needs checking.
- UB: Check the spinning process. The load may not be balanced inside the drum.
- 8C, 8C1, 8C2: The MEMS sensor needs checking.
- OC: Water may overflow.
- 3C: The motor needs checking.
- AC6: Check the PBA communication status.
- 9C1, 9C2: The electronic control needs to be checked.
- SF: The system has failed.
Sources
- User manual, Washer WF45T6000A*. Samsung Electronics America, Inc. Document DC68-04006R-07, revision 07, 204 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.