Samsung WF45T6000AW the load is wet at the end of a cycle
Cause 1 of 4The spin speed is too low. Source: Troubleshooting: Checkpoints, p. 54
First checkUse the High or Extra High spin speed.
Causes and checks
The spin speed is too low. Source: Troubleshooting: Checkpoints, p. 54
- Use the High or Extra High spin speed.
Too much detergent or the wrong type is making suds. Source: Troubleshooting: Checkpoints, p. 54
- Use high-efficiency (HE) detergent to reduce oversudsing.
The load is too small. Source: Troubleshooting: Checkpoints, p. 54
- Add items. Small loads of one or two items may become unbalanced and not spin completely.
The drain hose is kinked or clogged. Source: Troubleshooting: Checkpoints, p. 54
- Make sure the drain hose is not kinked or clogged.
All 4 causes checked. Contact Samsung Customer Service: 1-800-SAMSUNG (726-7864).
Service
If the checks above do not clear it, contact Samsung Customer Service: 1-800-SAMSUNG (726-7864), samsung.com/us/support/. United States. Source: Limited warranty (U.S.A.): contact details, p. 62
Other WF45T6000AW problems
- The washer does not start6 causes in the manual. First: the washer is not plugged in, or the household circuit is off.
- Not enough water, or no water, enters the washer5 causes in the manual. First: the faucet is not fully open.
- Detergent remains in the detergent drawer after a cycle3 causes in the manual. First: water pressure is too low.
- The washer vibrates excessively or makes noise7 causes in the manual. First: the floor is not level or solid.
- The washer does not drain or spin6 causes in the manual. First: the drain filter is clogged.
- The door does not open4 causes in the manual. First: the cycle is still running, or the door lock is still engaged.
- Excessive sudsThe detergent type or amount is wrong.
- Additional detergent cannot be addedThe detergent or fabric softener compartment is already at its limit.
- The washer stops during a cycle5 causes in the manual. First: the washer has no power.
- The washer fills with the wrong temperature of water5 causes in the manual. First: A tap is not fully open, or the temperature selection is wrong.
- The washer leaks water5 causes in the manual. First: the door is not closed properly.
- The washer smells3 causes in the manual. First: excessive suds collect in recesses.
- After a cycle, the washer is not off or the door does not openThe SELF CLEAN+ indicator is on.
Sources
- User manual, Washer WF45T6000A*. Samsung Electronics America, Inc. Document DC68-04006R-07, revision 07, 204 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.