LG WT7150CW error dL
The lid is not locked properly. The washer does not run unless the lid is locked.
Cause 1 of 3The lid is not closed, or nothing locks it. Source: Troubleshooting: Error Messages, p. 38
First checkClose the lid properly and press Start/Pause. A locking sound at the start of the cycle shows the lid has locked.
Causes and checks
The lid is not closed, or nothing locks it. Source: Troubleshooting: Error Messages, p. 38
- Close the lid properly and press Start/Pause. A locking sound at the start of the cycle shows the lid has locked.
Shipping material or clothing is caught under the lid. Source: Troubleshooting: Error Messages, p. 38
- Check that nothing is caught under the lid, including shipping material or clothing.
The latch mechanism is not fully retracted. Source: Troubleshooting: Error Messages, p. 38
- Check that the latch mechanism is fully retracted.
LG Customer Information Center If the lid is closed and dL is still displayed, contact LG service. Contact: 1-800-243-0000 or lg.com/us/support.
All 3 causes checked. Contact LG Customer Information Center: 1-800-243-0000.
Service
If the checks above do not clear it, contact LG Customer Information Center: 1-800-243-0000, lg.com/us/support. United States (Canada: 1-888-542-2623). Source: Limited Warranty: To Obtain Warranty Service, pp. 45, 49
Other WT7150CW codes
- UE: The load is out of balance, so the washer cannot spin it.
- IE: The washer is not getting enough water.
- OE: The washer cannot drain.
- dE: The lid is not closed properly.
- LE1: A foreign object, such as a coin, pin or clip, is caught between the pulsator and the inner tub. On some models LE shows first and then 1.
- LE: Motor locked error.
- tE: Control error (temperature sensor error).
- FE: The water level is too high because of a faulty water valve (overflow error).
- PE: The water level sensor is not working correctly (pressure sensor error).
- Eb: Clutch error. The manual calls it a mechanical failure.
- Ps: The supply voltage is not correct.
- CL: Not a fault. Control Lock is on.
- dr: Not a fault. The special drain feature is running. A cycle that stays paused for more than 4 minutes is canceled and the water left in the tub is drained.
- tCL: Not a fault. Tub Clean is running or due. On some models tc shows first and then L.
- ub: Not a fault. The washer has detected an out-of-balance load and is trying to rebalance it.
Sources
- Owner's Manual, Washing Machine WT7150C* / WT7000C* / WT7010C*. LG Electronics Inc. Document MFL68267084, revision Rev.04, 2026-10-02, 52 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 12 November 2026.
- Owner's Manual, Washing Machine WT7880H*A / WT7900H*A. LG Electronics Inc. Document MFL68267072, revision Rev.05, 2025-10-10, 60 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 12 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.