Roborock S7 how to clean the main brush
Every 2 weeks.
Steps
- Turn the robot over, then unlatch and remove the main brush cover.
- Take out the main brush, then remove and clean the bearings.
- Remove the main brush cap by rotating it in the unlock direction.
- Remove the tangled hair or dirt at both ends of the main brush.
- Reattach the main brush cap in the lock direction, reinstall the brush and press the main brush cover to lock it in place.
Wipe the main brush with a wet cloth and dry it thoroughly, out of direct sun. Do not use corrosive detergent or disinfectant on it.
Source: Routine Maintenance: Main Brush Source: Routine Maintenance: Main Brush, pp. 28-29
Other S7 procedures
- How to reset the WiFi connectionWhen the robot cannot connect to the app or must be added as a new device.
- How to restore the robot to factory settingsWhen the robot does not work after a system reset.
- How to clean the side brushOnce a month.
- How to clean the omni-directional wheelAs required.
- How to empty and clean the dustbinAs needed.
- How to clean the washable filterEvery 2 weeks.
- How to empty and rinse the water tankAs needed.
- How to clean the VibraRise mop clothAfter each use.
- How to clean the robot sensorsOnce a month.
- How to clean the charging contactsMonthly.
Sources
- Roborock S7 Robotic Vacuum Cleaner User Manual. Beijing Roborock Technology Co., Ltd. Document roborock S7, revision Undated download (PDF created 2021-03-21), 46 pages, en. support.roborock.com. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.