eufy G30 (T2250) how to charge RoboVac
Before first use, after Error 8, or when RoboVac does not dock by itself.
Steps
- Place the Charging Base on a level surface against a wall.
- Remove objects within 1.6 ft/0.5 m to the left and right and within 4.9 ft/1.5 m in front of the Charging Base.
- Connect the round connector of the adapter to the power socket on the Charging Base and plug the other end into a wall outlet. The Charging Base LED is solid white.
- Attach RoboVac to the Charging Base with the charging pins aligned, or press the Return to Charging Base button.
Source: Using Your RoboVac: Preparation; Charge Your RoboVac Source: Using Your RoboVac: Preparation; Charge Your RoboVac, pp. 10-11
Used for
- Error 8: The battery is low and the system shuts down.
- RoboVac will not start a scheduled cleaning
- RoboVac cannot be activated
- Cleaning time is shorter than 100 minutes
Other G30 (T2250) procedures
- How to restart RoboVacWhen RoboVac suddenly stops working or cannot be activated and the other checks did not help.
- How to reset the Wi-Fi connection and restore factory settingsTo set up the Wi-Fi connection again in the eufy Clean app. The reset also restores the factory default settings.
Sources
- Owner's Manual, RoboVac G30 T2250/T2251/T2252/T2253. Anker Innovations Limited. Document 51005003796, revision V02, 25 pages, en. service.eufy.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
- What if My RoboVac Stops with Error S1? (for L70/G Series). Anker Innovations Limited. Document Support article, revision Undated web article, 1 pages, en. service.eufy.com. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.