LG LRGL5823S self Clean is not working

Cause 1 of 3The oven temperature is too high to set a self-clean operation. Source: Troubleshooting: Before Calling for Service, p. 55

First checkLet the range cool to room temperature, then reset the controls.

Causes and checks

  1. The oven temperature is too high to set a self-clean operation. Source: Troubleshooting: Before Calling for Service, p. 55

    1. Let the range cool to room temperature, then reset the controls.
  2. The oven controls are set incorrectly. Source: Troubleshooting: Before Calling for Service, p. 55

    1. Follow the Self Clean section. See Run Self Clean.
  3. A cooktop burner is in use. Self Clean will not start, or turns off after a buzzer, while the cooktop is used. Source: Maintenance: Self Clean, p. 49

    1. Turn the burners off and start Self Clean again.

Service

If the checks above do not clear it, contact LG Customer Information Center: 1-800-243-0000, lg.com/us/support. United States (Canada: 1-888-542-2623). Source: Limited Warranty: To Obtain Warranty Service, p. 60

Other LRGL5823S problems

Sources

  1. Owner's Manual, Gas Range LRGL5825*, LRGL5823* and LRGL5821*. LG Electronics Inc. Document MFL33029630, revision Rev.18, 2025-01-24, 125 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
LRGL5823S, LRGL5825F. United States.
Source
Owner's Manual, Gas Range LRGL5825*, LRGL5823* and LRGL5821*, MFL33029630 revision Rev.18, 2025-01-24
Last verified
Handbook
LG LRGL5823S gas range in Ranges and ovens; all LG handbooks