LG LRE3061ST electric range
- Category
- Ranges and ovens
- Model number
- LRE3061ST
- Region
- United States
- Verified
- Error F-3
- Error F-9
- HS
- Error Hot
- End
- Flashing time
- OVEN LOCKOUT
- Oven will not work
- The appliance does not operate
- Oven light does not work
- Food does not bake or roast properly
- Food does not broil properly
- The oven smokes excessively during broiling
- Oven temperature is too hot or too cold
- Scratches or abrasions on the cooktop surface
- Metal marks, brown streaks or discoloration on the cooktop
- Surface units do not work properly
- Surface units will not maintain a rolling boil or cook fast enough
- Racks are sticky and hard to slide
- Range is not level
- How to set the clock
- How to turn Lockout on or off
- How to adjust the oven temperature
- How to turn Convection Auto Conversion on or off
- How to run EasyClean
- How to replace the oven light bulb
Nothing on this page matches. Search all models
Error codes
| Code | Meaning | Checks |
|---|---|---|
| F-3 | Key short error. | Checks |
| F-9 | Oven not heating. | Checks |
| HS | A cooking surface is too hot to touch. HS appears after an element is turned off and stays on until the surface cools to about 150 °F (66 °C). | Checks |
| Hot | The oven cavity is above 150 °F (65 °C), so EasyClean will not start until the oven cools. | Checks |
| End | The set timer has run out. The indicator tones sound every 15 seconds until Timer On/Off is pressed. | Checks |
| Flashing time | The range has just been plugged in or lost power. | Checks |
| OVEN LOCKOUT | The Lockout feature is on and most oven controls are disabled. | Checks |
F-3
The oven control beeps and F-3 shows. Key short error.
- Press Clear/Off to clear the display and stop the beeping.
- Reprogram the oven.
- If the fault returns, record the fault number, press Clear/Off and contact a service agent.
Source Source: Troubleshooting: Before Calling for Service, p. 46
F-9
The oven control beeps and F-9 shows. Oven not heating.
- Press Clear/Off to clear the display and stop the beeping.
- Reprogram the oven.
- If the fault returns, record the fault number, press Clear/Off and contact a service agent.
Source Source: Troubleshooting: Before Calling for Service, p. 46
HS
HS shows in the cooktop display. A cooking surface is too hot to touch. HS appears after an element is turned off and stays on until the surface cools to about 150 °F (66 °C).
- Wait until HS goes out before touching the surface.
Source Source: Troubleshooting: FAQs; Operation: Control Panel Overview, pp. 19, 44
Hot
Hot appears in the display when you press EasyClean. The oven cavity is above 150 °F (65 °C), so EasyClean will not start until the oven cools.
- Let the oven cool, then start EasyClean again. See Run EasyClean.
End
End shows in the display. The set timer has run out. The indicator tones sound every 15 seconds until Timer On/Off is pressed.
- Press Timer On/Off to stop the tones.
Flashing time
The time of day flashes. The range has just been plugged in or lost power.
- Press Clock and reset the time, or press any key to stop the flashing. See Set the clock.
Source Source: Troubleshooting: Before Calling for Service, p. 48
OVEN LOCKOUT
OVEN LOCKOUT appears in the display. The Lockout feature is on and most oven controls are disabled.
- Press and hold Clear/Off for three seconds to turn Lockout off. See Turn Lockout on or off.
Problems
- Oven will not work4 causes in the manual. First: the range plug is not completely inserted in the outlet.
- The appliance does not operate3 causes in the manual. First: the cord is not plugged in correctly.
- Oven light does not workThe bulb is loose or has failed.
- Food does not bake or roast properly4 causes in the manual. First: the oven controls are set incorrectly.
- Food does not broil properly5 causes in the manual. First: the oven controls are set incorrectly.
- The oven smokes excessively during broiling5 causes in the manual. First: the control is not set properly.
- Oven temperature is too hot or too coldThe oven sensor needs to be adjusted.
- Scratches or abrasions on the cooktop surface3 causes in the manual. First: salt, sand or other coarse particles between the cooktop and utensils scratched it.
- Metal marks, brown streaks or discoloration on the cooktop3 causes in the manual. First: metal utensils scraped across the cooktop.
- Surface units do not work properly2 causes in the manual. First: A fuse in the home is blown or the circuit breaker has tripped.
- Surface units will not maintain a rolling boil or cook fast enough2 causes in the manual. First: the cookware is not suited to the unit.
- Racks are sticky and hard to slideRacks stiffen over time.
- Range is not level2 causes in the manual. First: the installation is poor, or the floor is not level.
Oven light does not work
The bulb is loose or has failed. Source: Troubleshooting: Before Calling for Service, p. 47
- Replace or tighten the bulb. See Replace the oven light bulb.
Oven temperature is too hot or too cold
The oven sensor needs to be adjusted. Source: Troubleshooting: Before Calling for Service, p. 48
- See Oven Temperature Adjustment in the Features section. See Adjust the oven temperature.
Racks are sticky and hard to slide
Racks stiffen over time. Source: Troubleshooting: FAQs, p. 44
- Apply a small amount of olive oil to the ends of the racks.
Crackling or popping sound
Metal heats and cools during cooking cycles. Source: Troubleshooting: Before Calling for Service, p. 48
Fan noise, or the convection fan stops during Convection Bake
A convection fan can turn on and off automatically, and it stops during a convection bake cycle for more even heating. Source: Troubleshooting: Before Calling for Service, p. 48
Clicking noise from the back of the oven
The range holds the oven temperature more tightly, so the heating elements click on and off more often. Source: Troubleshooting: FAQs, p. 44
Elements cycle on and off, or a unit stops glowing at a lower setting
Elements cycle to maintain the heat setting, and a unit that stops glowing after a lower setting is still on and hot. Source: Troubleshooting: Before Calling for Service, p. 46
Steam through the oven vent
Cooking foods with high moisture produces steam. Source: Troubleshooting: Before Calling for Service, p. 47
How-to
- How to set the clockTo set the time of day. Timed oven functions need the right time.
- How to turn Lockout on or offTo keep the oven controls from being used, or to clear OVEN LOCKOUT.
- How to adjust the oven temperatureWhen the oven is hotter or cooler than expected after a few weeks of use.
- How to turn Convection Auto Conversion on or offTo control whether Conv. Bake and Conv. Roast subtract 25 °F (14 °C) from the recipe temperature you enter. It is on by default.
- How to run EasyCleanTo loosen light soil with water and a 20-minute low-temperature cycle before hand-cleaning.
- How to replace the oven light bulbWhen the oven light does not work.
Maintenance
| Task | Source |
|---|---|
| Wipe the cooktop with a damp towel and mild detergent after each use, and use cooktop cleaning cream weekly | Source: Maintenance: Maintaining the Cooktop, p. 35 |
| Replace a failed oven light bulb | Source: Maintenance: Changing the Oven Light, p. 40 |
| Clean light oven soil often with EasyClean to keep tough, burnt-on soil from building up | Source: Maintenance: EasyClean, p. 36 |
Settings
| Setting | Options | Default | Notes | Source |
|---|---|---|---|---|
| Hour mode | 12-hour or 24-hour clock | 12-hour | Source: Operation: Setting the Hour Mode, p. 20 | |
| Convection Auto Conversion (Auto) | Enable (1) or disable (2) | Enabled | Source: Operation: Setting Convection Auto Conversion, p. 21 | |
| Oven temperature adjustment (AdJU) | Up to 35 °F (19 °C) hotter or cooler | Source: Operation: Adjusting the Oven Temperature, p. 22 | ||
| Language (Lng) | English (1), Spanish (2) or French (3) | English | Source: Operation: Language, p. 22 | |
| Preheat alarm light (PrE) | On (1) or off (2) | Flashes 5 times, or until the door is opened, when the oven reaches its set temperature | Source: Operation: Turning the Preheat Alarm Light On/Off, p. 22 | |
| Beeper volume (BEEP) | Normal (1) or mute (2) | Source: Operation: Adjusting the Beeper Volume, p. 22 | ||
| Temperature unit (Unit) | Fahrenheit (1) or Celsius (2) | Fahrenheit | Source: Operation: Selecting Fahrenheit or Celsius, p. 22 |
Parts and consumables
| Item | Replace or refill | Specification | Source |
|---|---|---|---|
| Oven light bulb | – | Standard 40-watt appliance bulb | Source: Maintenance: Changing the Oven Light, p. 40 |
Specifications
Electric range with a glass-ceramic cooktop and a convection oven with Conv. Bake and Conv. Roast. The oven cleans with EasyClean (20 minutes); Self Clean is listed for LRE3083 only. Source: Operation: Changing Oven Settings; Maintenance: EasyClean, pp. 20, 35
An HS (hot surface) indicator shows in the display while any cooking surface is too hot to touch, until it cools to about 150 °F, and also during a self-clean cycle on models that have one. Source: Operation: Control Panel Overview, p. 19
| Electrical requirements | 120/240 V: 14.5 kW; 120/208 V: 11.5 kW | Source: Installation: Product Specifications, p. 10 |
|---|---|---|
| Bake temperature range | 170 °F (80 °C) to 550 °F (285 °C); default 350 °F | Source: Operation: Minimum and Maximum Default Settings, p. 20 |
| Conv. Bake and Conv. Roast range | 300 °F (150 °C) to 550 °F (285 °C) | Source: Operation: Minimum and Maximum Default Settings, p. 20 |
| Convection Auto Conversion | On by default; subtracts 25 °F (14 °C) from the temperature you enter | Source: Operation: Setting Convection Auto Conversion, p. 21 |
| Oven temperature adjustment | Up to 35 °F (19 °C) hotter or cooler; does not affect Broil | Source: Operation: Adjusting the Oven Temperature, p. 22 |
| EasyClean | 20 minutes; blocked while the oven cavity is above 150 °F (65 °C) | Source: Maintenance: EasyClean, pp. 35-36 |
| Oven light | Standard 40-watt appliance bulb | Source: Maintenance: Changing the Oven Light, p. 40 |
Recalls
No exact-model match for LRE3061ST in the U.S. Consumer Product Safety Commission recall database, checked . Recalls can name model families, so also check current recalls for LG.
Service contact
LG Customer Information Center: 1-800-243-0000, lg.com/us/support. United States (Canada: 1-888-542-2623). Source: Product Overview: Accessories; Limited Warranty: To Obtain Warranty Service, pp. 9, 53
Sources
- Owner's Manual, Electric Range LRE3083**, LRE3061**, LRE3193** and LRE3060**. LG Electronics Inc. Document MFL57206015, revision Rev.10, 2019-04-30, 108 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.
All LG handbooks. Report an error to hello@modelhandbook.com.