Ninja OS401 how to install the pressure lid

Before using the Pressure Cook, Steam, Sous Vide, Slow Cook or Yogurt function.

Steps

WARNING

To prevent risk of explosion and injury, use only SharkNinja silicone rings. Make certain silicone ring is installed and lid is properly closed before operating. DO NOT use if torn or damaged. Replace silicone ring before using.

Marked WARNING by the manufacturer Source: Important Safeguards: item 16, p. 2

  1. Align the arrow on the front of the lid with the arrow on the front of the cooker base.
  2. Turn the lid clockwise until it locks into place.
  3. Turn the pressure release valve to SEAL for the Pressure Cook function, or to VENT for Steam, Sous Vide, Slow Cook and Yogurt.

The pressure lid will not unlock until the unit is completely depressurized.

Source: Familiarizing Yourself With Pressure Cooking; Installing & Removing the Pressure Lid Source: Familiarizing Yourself With Pressure Cooking; Installing & Removing the Pressure Lid, pp. 13, 15, 16, 17, 18

Used for

Other OS401 procedures

Sources

  1. OS401 Owner's Guide: Foodi 10-in-1 8-QT XL Pressure Cooker. SharkNinja Operating LLC. Document OS401_IB, revision MP_REV_Mv12, 25 pages, en. ninjakitchen.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
OS401. North America.
Source
OS401 Owner's Guide: Foodi 10-in-1 8-QT XL Pressure Cooker, OS401_IB revision MP_REV_Mv12
Last verified
Handbook
Ninja Foodi 10-in-1 8-qt XL Pressure Cooker in Multicookers and pressure cookers; all Ninja handbooks