GE GTD33EASKWW electric dryer
- Category
- Dryers
- Model number
- GTD33EASKWW
- Region
- United States
- Verified
- Rating label
- On the inside front face of the dryer compartment, on the left or right side, with the door open. Source: support page
- Dryer shakes or makes noise
- Clothes take too long to dry
- Dryer does not start
- Dryer does not heat
- Drying times are inconsistent
- Clothes are wrinkled
- Clothes shrink
- Greasy spots on clothes
- Lint on clothes
- Static occurs
- How to clean the lint filter
- How to clean the exhaust duct
Nothing on this page matches. Search all models
Problems
- Dryer shakes or makes noiseSome shaking and noise is normal, or the dryer is sitting unevenly.
- Clothes take too long to dry8 causes in the manual. First: the ducting is improper or obstructed.
- Dryer does not start2 causes in the manual. First: the dryer is unplugged.
- Dryer does not heat2 causes in the manual. First: A fuse is blown or a circuit breaker is tripped. The dryer may tumble but not heat when only one fuse is blown or one breaker is tripped.
- Drying times are inconsistent2 causes in the manual. First: the type of heat differs. Changing from an electric dryer to a gas dryer, or the reverse, changes the drying time.
- Clothes are wrinkled3 causes in the manual. First: the clothes were overdried.
- Clothes shrinkSome fabrics shrink when washed, and others can be washed safely but shrink in the dryer.
- Greasy spots on clothes3 causes in the manual. First: fabric softener was used improperly.
- Lint on clothes5 causes in the manual. First: the lint filter is full.
- Static occurs3 causes in the manual. First: no fabric softener was used.
Dryer shakes or makes noise
Some shaking and noise is normal, or the dryer is sitting unevenly. Source: Troubleshooting Tips, p. 9
- Move the dryer to an even floor space, or adjust the leveling legs until it is even.
Clothes shrink
Some fabrics shrink when washed, and others can be washed safely but shrink in the dryer. Source: Troubleshooting Tips, p. 10
- Follow garment care labels exactly. Some items may be pressed back into shape after drying.
- If you are concerned about shrinkage in a particular item, do not machine wash or tumble dry it.
How-to
- How to clean the lint filterBefore each use. Also when the lint filter has a waxy buildup from fabric softener sheets, or dryer performance changes.
- How to clean the exhaust ductAt least once a year, to prevent clogging. A partially clogged exhaust lengthens the drying time.
Maintenance
| Task | When | Source |
|---|---|---|
| Clean the lint filter | Before each use | Source: Care and Cleaning: Lint Filter, p. 8 |
| Inspect and clean the exhaust ducting to prevent clogging | At least once a year | Source: Care and Cleaning: Interior and Duct, p. 8 |
| Clean the interior of the dryer and the exhaust duct (professional service) | Once a year | Source: Care and Cleaning: Interior and Duct, p. 8 |
| Wipe or dust spills and washing compounds from the exterior with a damp cloth. Apply laundry pretreatment soil and stain removers away from the dryer, because they can damage the control panel and finishes. | Source: Care and Cleaning: Exterior, p. 8 |
Specifications
Aluminized alloy drum electric dryer, 7.2 cu. ft. Source: Dimensions and installation information, p. 1
The Cycle Selector sets Cottons, Permanent Press, Timed Dry (up to 80 minutes) or Air Fluff. The Temperature control sets High, Medium or Air Fluff No Heat. Source: Using the Dryer: Getting started, p. 6
Clean the lint filter before each use, and have the exhaust duct inspected and cleaned at least once a year. A partially clogged exhaust lengthens the drying time. Source: Care and Cleaning, p. 8
| Capacity | 7.2 cu. ft. | Source: Dimensions and installation information, p. 1 |
|---|---|---|
| Electric rating | 240 V, 5600 W, 24 A, 60 Hz; or 208 V, 4400 W, 22 A, 60 Hz | Source: Dimensions and installation information, p. 1 |
| Circuit requirement | An individual, properly grounded branch circuit protected by a 30-amp circuit breaker or time-delay fuse. The wall outlet must be within 36 inches of the service cord entry. | Source: Dimensions and installation information, p. 1 |
| Exhaust options | 4-way: rear, right, left and bottom. 4-inch rigid metal duct. | Source: Dimensions and installation information; Ducting materials, pp. 1-2 |
| Model and serial number location | On the label on the front of the dryer, behind the door | Source: Cover, p. 1 |
Recalls
No exact-model match for GTD33EASKWW in the U.S. Consumer Product Safety Commission recall database, checked . Recalls can name model families, so also check current recalls for GE Appliances.
Service contact
GE Appliances: 800.GE.CARES (800.432.2737), geappliances.com/service. United States. Source: Consumer Support: Schedule Service, p. 12
Sources
- Owner's Manual, Dryers 49-90550-3. GE Appliances, a Haier company. Document 49-90550-3, revision 03-20, 2020-03, 24 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
- Quick Specs, GTD33EASK 7.2 Cu. Ft. Capacity Aluminized Alloy Drum Electric Dryer. GE Appliances. Document GTD33EASK, revision Quick Specs, 3 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.
All GE Appliances handbooks. Report an error to hello@modelhandbook.com.