Miele G 7200 how to open the door by hand
When the Door fault message shows that the door did not open automatically.
Steps
WARNING
Risk of scalding due to hot water. During operation, water in the dishwasher may be very hot. During operation, only open the door with extreme caution.
Signal word assigned by Model Handbook Source: Before using for the first time: Opening the door, p. 20
- Reach under the recessed grip and pull the handle firmly.
- Open the door fully to disengage the locking mechanism.
Source: Before using for the first time: Opening the door Source: Before using for the first time: Opening the door, p. 20
Used for
- Door fault: The door does not open automatically, or the door lock catches do not retract after the door is opened.
Other G 7200 procedures
- How to clean the filter combinationWhen the Check filters message appears after 50 programme cycles, or when the Drain message or water left in the cabinet points to a clogged filter.
- How to clean the water inlet filterWhen the Water intake message appears or too little water flows into the wash cabinet.
- How to clean the drain pumpWhen water remains in the wash cabinet after the end of the programme, or the Drain message appears.
Sources
- Operating instructions, Dishwashers G 7200, G 7202, G 7205, G 7207. Miele & Cie. KG. Document M.-Nr. 11 952 311, revision / 01, HG07, en-GB, 100 pages, en-GB. media.miele.com (PDF). Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.