Bosch SHE3AEM2N food is left on the dishes
Cause 1 of 9Dishware was placed too close together or the rack is overfilled. Source: Troubleshooting (cont.), p. 26
First checkArrange dishware with sufficient space in between so the spray jets reach the surfaces of the dishware.
Causes and checks
Dishware was placed too close together or the rack is overfilled. Source: Troubleshooting (cont.), p. 26
- Arrange dishware with sufficient space in between so the spray jets reach the surfaces of the dishware.
- Avoid points of contact.
Spray arm rotation of the lower spray arm is blocked. Source: Troubleshooting (cont.), p. 26
- Arrange dishware so it does not obstruct spray arm rotation.
Spray arm nozzles are blocked. Source: Troubleshooting (cont.), p. 26
- Clean the spray arms. See Clean the spray arms.
The filters are dirty. Source: Troubleshooting (cont.), p. 26
- Clean the filters. See Clean the filters.
The filters are inserted incorrectly or not engaged. Source: Troubleshooting (cont.), p. 26
- Insert the filters properly.
- Twist the filters into place.
The selected wash cycle is too light. Source: Troubleshooting (cont.), p. 26
- Select a more intensive wash program.
Dishware has been precleaned too intensively, so the sensors choose a lighter cycle and stubborn remnants cannot be entirely removed. Source: Troubleshooting (cont.), p. 26
- Only remove large remnants of food and do not pre-rinse dishware.
Tall narrow containers in corner areas are not rinsed out adequately. Source: Troubleshooting (cont.), p. 26
- Do not position tall narrow containers at too great an angle or in corner areas.
The upper rack on the right and left is not set to the same height. Source: Troubleshooting (cont.), p. 26
- Set the upper rack on the left and right to the same height.
All 9 causes checked. Contact Bosch Customer Service: 1-800-944-2904.
Service
If the checks above do not clear it, contact Bosch Customer Service: 1-800-944-2904, bosch-home.com/us/owner-support/get-support. United States and Canada. Source: Customer Service, p. 31
Other SHE3AEM2N problems
- Water is left in the tub after the cycle2 causes in the manual. First: the filter system or the area under the filters is blocked.
- Dishes are not dry7 causes in the manual. First: no rinse aid is used, or the dosage is set too low.
- Too much foam3 causes in the manual. First: hand soap got into the rinse aid dispenser.
- Dishwasher does not start3 causes in the manual. First: the breaker has tripped.
- Door cannot be closed2 causes in the manual. First: the door lock has engaged.
- The WLAN display flashes or the connection to the home network is not established2 causes in the manual. First: the WLAN on the router is not active, or the home network is not available.
Sources
- Use and Care Manual, Dishwasher SHE3AEM2N. BSH Home Appliances Corporation. Document 9001831729, revision B, 36 pages, en-US. media3.bsh-group.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
- Use and Care Manual, Dishwasher SHE3AEM6N. BSH Home Appliances Corporation. Document 9001831733, revision B, 36 pages, en-US. media3.bosch-home.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
- Specification sheet, Dishwasher SHE3AEM2N. BSH Home Appliances Corporation. Document 21844544, revision SHE3AEM2N, 3 pages, en-US. media3.bsh-group.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.