Philips EP3241/54 how to clean the brew group

Rinse weekly; use a coffee oil remover tablet monthly.

You need

Steps

  1. Remove the brew group and rinse it under the tap, cleaning the upper filter carefully.
  2. Let it air-dry before refitting; do not dry it with a cloth.
  3. Monthly: fill the tank, put a cup under the spout and drop a Philips coffee oil remover tablet in the pre-ground compartment.
  4. Tap the coffee icon, hold the aroma strength icon for 3 seconds to select pre-ground, and press start/stop without adding coffee.
  5. When half a cup has run, unplug the machine and leave it for at least 15 minutes.
  6. Plug in and switch on to finish the cycle, then remove and rinse the brew group.
  7. Refit it and run the pre-ground cycle without coffee twice more.

Source: Cleaning the brew group Source: Cleaning the brew group, p. 13

Used for

Other EP3241/54 procedures

Sources

  1. User manual, Fully automatic espresso machine 800, 1200, 2200, 2300 and 3200 series (multilingual; English pp. 4–24). Versuni Holding B.V. Document 642001040436, revision 07/2026, 2026-07, 635 pages, en. dam.versuni.com (PDF). Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
EP3241 (variant EP3241/54). United States and Europe.
Source
User manual, Fully automatic espresso machine 800, 1200, 2200, 2300 and 3200 series (multilingual; English pp. 4–24), 642001040436 revision 07/2026, 2026-07
Last verified
Handbook
Philips 3200 Series LatteGo EP3241/54 in Coffee and espresso machines; all Philips handbooks