Levoit Core 300S how to replace the filter
When the Check Filter Indicator lights and the filter is clogged, noisy or loses airflow, or every 6 to 8 months.
Steps
- Unplug the air purifier.
- Turn the air purifier over and remove the filter cover.
- Remove the old filter.
- Vacuum any remaining dust or hair from inside the air purifier with a vacuum hose. Do not use water or liquids.
- Unwrap the new filter and place it in the housing.
- Replace the cover and plug in the air purifier.
- Reset the Check Filter Indicator. See Reset the Check Filter Indicator.
Source: Care & Maintenance (cont.) Source: Care & Maintenance (cont.), p. 14
Used for
- Check Filter Indicator: A reminder to check the filter. It lights within 6 to 8 months of use, sooner with frequent use and later with light use.
- Airflow is significantly reduced
- Air purifier makes an unusual noise while the fan is on
- Poor air purification quality
Other Core 300S procedures
- How to reset the Check Filter IndicatorAfter replacing the filter while the indicator is lit, or after replacing it before the indicator lit.
- How to clean the pre-filterEvery 2 to 4 weeks.
- How to clean the AirSight Plus Laser Dust SensorEvery 3 months, or when the air quality ring stays red. More often in a dusty environment.
Sources
- User Manual, Core 300S series and Core 300S-P series smart air purifier. Arovast Corporation. Document HEAPAPLVSUS0073A, revision A2-240918, 24 pages, en-US. levoit.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.