Levoit Core 300S airflow is significantly reduced
Cause 1 of 3Airflow is significantly reduced. Source: Troubleshooting, p. 15
First checkMake sure the filter is removed from its packaging and properly in place.
Causes and checks
Airflow is significantly reduced. Source: Troubleshooting, p. 15
- Make sure the filter is removed from its packaging and properly in place.
- Tap the Fan Speed button to increase the fan speed.
- Leave 15 inches (38 cm) of clearance on all sides of the air purifier.
The pre-filter may be clogged by large particles, such as hair or lint, blocking airflow. Source: Troubleshooting, p. 15
- Clean the pre-filter. See Clean the pre-filter.
The filter may need replacing. Source: Troubleshooting, p. 15
- Replace the filter. See Replace the filter.
All 3 causes checked. Contact Levoit Customer Support: 1-888-726-8520.
Service
If the checks above do not clear it, contact Levoit Customer Support: 1-888-726-8520, support.levoit.com. United States (Monday to Friday, 9:00 am to 5:00 pm PST/PDT). Source: Customer Support, p. 21
Other Core 300S problems
- Air purifier will not turn on or respond to buttons2 causes in the manual. First: the purifier gets no power, or the power cord is damaged.
- Air purifier makes an unusual noise while the fan is on3 causes in the manual. First: the filter is out of position or the purifier stands on an uneven surface.
- Strange smell coming from the air purifierStrange smell coming from the air purifier.
- Poor air purification quality3 causes in the manual. First: the room is larger than 219 ft² (20 m²). The air purifier may not be as effective in larger rooms.
- Air quality indicator always stays red2 causes in the manual. First: the AirSight Plus Laser Dust Sensor may need to be cleaned. Dust blocking the sensor affects its accuracy.
- Air quality indicator always stays blue when the air is poorThe AirSight Plus Laser Dust Sensor detects airborne particles but cannot detect gas.
- Purifier will not connect to the VeSync app4 causes in the manual. First: during setup the purifier must be on a secure 2.4GHz Wi-Fi network.
- Purifier shows offline in the VeSync app2 causes in the manual. First: the purifier is offline.
Sources
- User Manual, Core 300S series and Core 300S-P series smart air purifier. Arovast Corporation. Document HEAPAPLVSUS0073A, revision A2-240918, 24 pages, en-US. levoit.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.