Samsung WA49B5205AW how to run the SELF CLEAN cycle

At least once a month or every 20 cycles. The SELF CLEAN reminder icon blinks for an hour after 20 washing cycles.

Steps

CAUTION

Check the washer tub before using the SELF CLEAN cycle. Remove any remaining water in the tub by running a SPIN ONLY cycle prior to starting the SELF CLEAN cycle.

Marked CAUTION by the manufacturer Source: Maintenance: Self Clean, p. 47

  1. Remove all items from the washer tub and make sure it is empty. Laundry left in the tub during the cycle may be damaged.
  2. Press Power to turn on the washer.
  3. Turn the Cycle Selector to SELF CLEAN.
CAUTION

If there is chlorine bleach left in the washer tub for an extended period of time, rust can occur.

Marked CAUTION by the manufacturer Source: Maintenance: Self Clean, p. 47

  1. If residue is present in the tub, add 1 cup (8 fl. oz, 240 ml) of liquid chlorine bleach to the bleach compartment. Do not use or mix any other detergent or chemicals during the cycle.
  2. Press and hold Start/Pause (Hold to Start).

The water temperature for SELF CLEAN is Hot and cannot be changed. If necessary, run a RINSE+SPIN cycle afterwards to help remove any remaining residue.

Source: Maintenance: Self Clean Source: Maintenance: Self Clean, p. 47

Used for

Other WA49B5205AW procedures

Sources

  1. User manual, Washer WA49B5205A*. Samsung Electronics America, Inc. Document DC68-04037Q-05, revision 05, 72 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WA49B5205AW (variant WA49B5205AW/US). United States.
Source
User manual, Washer WA49B5205A*, DC68-04037Q-05 revision 05
Last verified
Handbook
Samsung WA49B5205AW top-load washer in Washers; all Samsung handbooks