LG WT7150CW how to thaw frozen water inlet hoses
When the inlet hoses are frozen.
Steps
- Turn off the washer and unplug the power cord.
- Turn off the faucets connected to the hoses.
- Pour hot water on the frozen faucets and remove the hoses.
- Put the hoses in hot water until they thaw.
- Reconnect the hoses to the washer and the faucets and turn the faucets on.
- Press Power, then hold the Spin button for 3 seconds to run Spin Only.
- Press Start/Pause and check that the water fills properly.
Source: Maintenance: Care in Cold Climates Source: Maintenance: Care in Cold Climates, pp. 35-36
Other WT7150CW procedures
- How to run the Tub Clean cycleWhen tCL shows, once a month, and once a week for three weeks if the tub smells musty.
- How to clean the water inlet filtersWhen IE appears or the washer fills slowly.
- How to clean the dispenser drawerOnce or twice a month, or when detergent has built up.
- How to clean the bleach dispenserOnce or twice a month, and when bleach does not dispense.
- How to level the washerWhen the washer rocks or vibrates during spin.
- How to thaw a frozen drain hoseWhen the drain hose is frozen.
Sources
- Owner's Manual, Washing Machine WT7150C* / WT7000C* / WT7010C*. LG Electronics Inc. Document MFL68267084, revision Rev.04, 2026-10-02, 52 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 12 November 2026.
- Owner's Manual, Washing Machine WT7880H*A / WT7900H*A. LG Electronics Inc. Document MFL68267072, revision Rev.05, 2025-10-10, 60 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 12 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.