LG WM3670HWA how to clean the drain pump filter

When the washer drains slowly or shows OE, when coins or pins rattle, and periodically.

You need

Steps

WARNING

Make sure to unplug the washer before cleaning. Failure to do so may cause electric shock. Opening the drain filter will result in water overflowing if there is water in the washer tub. Make sure to check if the water is completely drained before opening the drain filter.

Marked WARNING by the manufacturer Source: Maintenance: Cleaning the Drain Pump Filter, p. 33

  1. Press Power to turn the washer off and pull out the plug.
  2. Open the drain pump filter cover.
  3. Unclip the small drain hose, remove its plug and let the remaining water run into a container.
  4. Twist the pump filter counterclockwise and remove it.
  5. Clean the filter and the opening.
  6. Put the plug back on the drain hose and clip the hose back.
  7. Insert the filter fully. A missing or badly fitted filter causes leaks.
  8. Close the filter cover.

Source: Maintenance: Cleaning the Drain Pump Filter Source: Maintenance: Cleaning the Drain Pump Filter, p. 33

Used for

Other WM3670HWA procedures

Sources

  1. Owner's Manual, Washing Machine WM3670H*A. LG Electronics Inc. Document MFL68639738, revision ver.081KCH/BB, 89 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
WM3670HWA (variant WM3670HWA.ABWEVUS). United States and Canada.
Source
Owner's Manual, Washing Machine WM3670H*A, MFL68639738 revision ver.081KCH/BB
Last verified
Handbook
LG WM3670HWA front-load washer in Washers; all LG handbooks