Dyson v15 filter cleaning

At least once a month, and when the screen shows 'Filter needs cleaning'.

Steps

  1. Twist the filter counter-clockwise and pull it away from the machine. It sits at the rear of the machine.
  2. Hold the filter by its hard plastic end and tap the other end gently over a bin to remove loose dust.
  3. Wash the filter under warm running tap water, gently rubbing it with your fingers to remove the dirt.
  4. Fill the filter with warm tap water, cover the open end with your hand and shake it firmly. Repeat until the water runs clear.
  5. Empty the filter and shake it firmly until no water comes out.
NOTICE

Do not dry the filter in a tumble dryer, in a microwave or near a naked flame.

Signal word assigned by Model Handbook Source: Washing your filter, p. 11

  1. Stand the filter on its end, pleated end up, in a warm, well-ventilated place for at least 24 hours.
NOTICE

The filter must be completely dry before it goes back into the machine. The machine could be damaged if used with a damp filter.

Signal word assigned by Model Handbook Source: Washing your filter, p. 11

  1. Refit the filter only when it is completely dry.

Source: Washing your filter Source: Washing your filter, p. 11

Used for

Other V15 detect procedures

Sources

  1. V15 detect user manual. Dyson. Document Version no. 01, revision PDF file modified 2023-05-18, 14 pages, en-US. dyson.com (PDF). Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
V15 detect. United States.
Source
V15 detect user manual, Version no. 01 revision PDF file modified 2023-05-18
Last verified
Handbook
Dyson V15 detect cordless vacuum in Stick vacuums; all Dyson handbooks