LG LRMVS3006S how to replace the water filter

When the Water Filter icon lights, about every six months, or when dispenser output or ice size drops.

You need

Steps

  1. Remove the door bin.
  2. Wrap a cloth around the front end of the water filter cover and remove the disposable water filter. Hold the removed filter upright to keep remaining water from spilling.
WARNING

Use of unauthorized water filters may result in product malfunction, water leakage or water quality issues, which will not be covered under the product warranty.

Marked WARNING by the manufacturer Source: Maintenance: Water Filter, p. 47

  1. Insert the new filter into the filter head and rotate it clockwise until the arrow on the filter lines up with the arrow on the filter head, then swing it back into the compartment.
  2. Replace the door bin.
  3. Press and hold the Water Filter button for three seconds to reset the indicator light.
  4. Dispense 2.5 gallons (10 liters) of water, about 5 minutes, pressing and releasing the dispenser pad in cycles of 30 seconds on and 60 seconds off.

Replacing the filter drains about 1 oz (25 cc) of water.

Source: Maintenance: Water Filter Source: Maintenance: Water Filter, pp. 47-48

Used for

Other LRMVS3006S procedures

Sources

  1. Owner's Manual, French Door Refrigerator LRMDS3006, LRMVS3006, LRMDC2306, LRMVC2306, LLMXS3006, LRMXS3006. LG Electronics Inc. Document MFL69497032, revision Rev.16, 2026-02-04, 72 pages, en-US. gscs-b2c.lge.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
LRMVS3006S. United States and Canada.
Source
Owner's Manual, French Door Refrigerator LRMDS3006, LRMVS3006, LRMDC2306, LRMVC2306, LLMXS3006, LRMXS3006, MFL69497032 revision Rev.16, 2026-02-04
Last verified
Handbook
LG LRMVS3006S InstaView French door refrigerator in Refrigerators; all LG handbooks