Frigidaire FFTR1835VW how to clean the auto-humidity control
When the humidity control membrane is soiled. The guide does not recommend replacing it unless it is damaged.
Steps
- Reach to the back of the humidity control cover and pull up on the cover.
- Pull the cover toward the back of the cabinet and remove it.
- Clean the humidity control with hot soapy water. Make sure the membrane is dry before putting it back in the cover.
- Replace the cover by reversing the steps, and repeat for the other crisper.
Source: Storage Features: Auto-humidity control Source: Storage Features: Auto-humidity control, p. 22
Other FFTR1835VW procedures
- How to set the refrigerator and freezer temperatureWhen the refrigerator or freezer is too warm or too cold. At first start-up, set the controls to Recommended and adjust after 24 hours.
- How to replace the air filterEvery 6 months. The air filter is in the top center of the fresh food compartment.
- How to clean the interior and door linersAt least twice a year, and when spills occur. Wipe up spills immediately.
- How to replace the LED light bulbWhen the cabinet light does not work.
- How to move or replace a glass shelfTo change a shelf position.
- How to lower the anti-tip bracketsAfter placing the refrigerator. The brackets are on the lower front corners of the cabinet.
Sources
- Fridge Freezer User Manual (Complete Owner's Guide), top-freezer models. Electrolux Home Products, Inc. (Frigidaire). Document A131103101, revision August 2024, 2024-08, 32 pages, en-US. frigidaire.bynder.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
- FFTR1835V Product Specifications, 18.3 Cu. Ft. Top Freezer Refrigerator. Electrolux Home Products, Inc. (Frigidaire). Document FFTR1835V, revision Version 09/23, 2023-09, 2 pages, en-US. frigidaire.bynder.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.