Ge range f3 error code
The oven control has detected a function error.
CauseThe control reports a function error code. Source: Troubleshooting Tips, p. 28
First checkPress the Cancel/Off pad.
Causes and checks
The control reports a function error code. Source: Troubleshooting Tips, p. 28
- Press the Cancel/Off pad.
- Let the oven cool for one hour, then use the oven again.
- If the code returns, disconnect all power to the oven for at least 30 seconds, then reconnect power.
- If the code returns again, call for service.
Service
If the checks above do not clear it, contact GE Appliances: 800.432.2737, geappliances.com/. United States. Source: Consumer Support, p. 32
Other JB735SPSS codes
- DOOR LOCK: A self-clean cycle was selected while the oven door was open.
- DOOR LOCK light: The door stays locked until the oven interior cools below the locking temperature.
- HOT: The oven is too hot to start Steam Clean.
- ] and ] [: After a delay a second bracket appears while the oven is baking. The display returns to a single bracket when the cook time ends, and no tone sounds.
- Flashing display: A power failure or surge reset the clock.
Sources
- Owner's Manual, 30-inch Free-Standing Electric Ranges PB935, JB735 and JS760. GE Appliances, a Haier company. Document 49-2000999, revision Rev 3, 2024-06, 64 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
- Quick Specs, JB735SP/EP/FP/DP 30-inch Free-Standing Electric Convection Range. GE Appliances. Document JB735SP/EP/FP/DP, revision Specification Revised 7/20, 2020-07, 2 pages, en-US. images.salsify.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.