Ninja foodi watr error
The WATR message appears with the Steam function or the Pressure function.
Cause 1 of 2WATR appears while using the Steam function: the water level is too low. Source: Troubleshooting Guide: "WATR" error message, Steam function, p. 23
First checkAdd more water to the unit for the function to continue.
Causes and checks
WATR appears while using the Steam function: the water level is too low. Source: Troubleshooting Guide: "WATR" error message, Steam function, p. 23
- Add more water to the unit for the function to continue.
WATR appears while using the Pressure function. Source: Troubleshooting Guide: "WATR" error message, Pressure function, p. 23
- Add more liquid to the cooking pot before restarting the pressure cook cycle.
- Make sure the pressure release valve is in the SEAL position.
- Make sure the silicone ring is installed correctly. See Remove and reinstall the silicone ring.
All 2 causes checked. Contact SharkNinja Customer Service: 1-877-646-5288.
Service
If the checks above do not clear it, contact SharkNinja Customer Service: 1-877-646-5288, ninjakitchen.com/support. North America. Source: Troubleshooting Guide; Warranty, pp. 23, 25
Other OS401 codes
- ADD POT: The cooking pot is not inside the cooker base.
- LID: The LID message appears with a flashing lid icon.
- SHUT: The crisping lid is open.
- HOT: The unit has overheated.
- ERR: The unit is not functioning properly.
- PRE: The unit is building pressure or preheating while the Pressure or Steam function runs.
- ADD FOOD: Sous Vide preheating is complete.
- BOIL: The unit is pasteurizing the milk.
- COOL: The milk has reached the pasteurization temperature.
- ADD AND STIR: The milk has cooled and the yogurt cultures can be added.
- DONE: The yogurt incubation time is complete.
Sources
- OS401 Owner's Guide: Foodi 10-in-1 8-QT XL Pressure Cooker. SharkNinja Operating LLC. Document OS401_IB, revision MP_REV_Mv12, 25 pages, en. ninjakitchen.com. Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.