Samsung DVE45T6000W items are still wrinkled after Wrinkle Prevent
Cause 1 of 2The load is too large or mixed. Source: Troubleshooting: Checkpoints, p. 46
First checkDry small loads of 1 to 4 items.
Causes and checks
The load is too large or mixed. Source: Troubleshooting: Checkpoints, p. 46
- Dry small loads of 1 to 4 items.
- Load fewer items, and load similar types of item.
The items stayed in the dryer. Source: Troubleshooting: Checkpoints, p. 46
- Take out the items immediately after drying is complete.
All 2 causes checked. Contact Samsung Customer Service: 1-800-SAMSUNG (726-7864).
Service
If the checks above do not clear it, contact Samsung Customer Service: 1-800-SAMSUNG (726-7864), samsung.com/us/support/. United States. Source: Limited warranty (U.S.A.): contact details, p. 53
Other DVE45T6000W problems
- The dryer does not run4 causes in the manual. First: the door is not latched shut.
- The dryer does not heat5 causes in the manual. First: the household circuit has a fault.
- The dryer does not dry the load6 causes in the manual. First: the checks for a dryer that does not heat apply.
- The dryer is noisy3 causes in the manual. First: objects are in the load.
- The dryer dries unevenly2 causes in the manual. First: seams, pockets and heavy areas dry last.
- Lint is left on clothes3 causes in the manual. First: the lint filter is not cleaned often enough.
- Drying takes longer than expectedSensor Dry sets the time by load moisture.
Sources
- User manual, Dryer DVE(G)45T6005* / DVE(G)45T6000*. Samsung Electronics America, Inc. Document DC68-03381W-04, revision 04, 56 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.