Samsung DVE45R6100W error tC

The Thermistor1 resistance is very low or high.

Cause 1 of 2The Thermistor1 resistance is very low or high. Source: Troubleshooting: Information codes, p. 58

First checkCheck for a clogged lint screen.

Causes and checks

  1. The Thermistor1 resistance is very low or high. Source: Troubleshooting: Information codes, p. 58

    1. Check for a clogged lint screen. See Clean the lint filter.
    2. Check whether the vent system is restricted.
    Samsung Customer Service If this information code remains, contact a Samsung service center. Contact: 1-800-SAMSUNG (726-7864) or samsung.com/us/support/.
  2. The vent blockage test reported a temperature sensor error. Source: Installation: Installation check codes, p. 35

    Samsung Customer Service Contact a Samsung service center. Contact: 1-800-SAMSUNG (726-7864) or samsung.com/us/support/.

Service

If the checks above do not clear it, contact Samsung Customer Service: 1-800-SAMSUNG (726-7864), samsung.com/us/support/. United States. Source: Limited warranty (U.S.A.): contact details, p. 63

Other DVE45R6100W codes

Sources

  1. User manual, Dryer DVE(G)45R6300* / DVE(G)45R6100*. Samsung Electronics America, Inc. Document DC68-03381T-16, revision 16, 68 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.

Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.

Applies to
DVE45R6100W. United States.
Source
User manual, Dryer DVE(G)45R6300* / DVE(G)45R6100*, DC68-03381T-16 revision 16
Last verified
Handbook
Samsung DVE45R6100W electric dryer in Dryers; all Samsung handbooks