Samsung DVE45B6300W how to register the dryer in the SmartThings app
To control or monitor the dryer remotely. The dryer supports Wi-Fi 2.4 GHz.
Steps
- Make sure your smartphone is connected to a wireless network.
- Open SmartThings on your smartphone, signed in with your Samsung account.
- If the message "A new device is found." appears, select Add. If no message appears, select + and then select the dryer from the list of available devices.
- If the dryer is not listed, select Device Type > Specific Device Model and add it manually.
- Register the dryer in SmartThings and make sure it is connected. The dryer name appears on your smartphone when registration is complete.
The dryer connects to Wi-Fi automatically when it starts. To switch the connection on or off by hand, press and hold Temp. and Smart Control together for 3 seconds; 1 in the display means on and 0 means off.
Source: SmartThings: To register your appliance to SmartThings Source: SmartThings: To register your appliance to SmartThings, p. 51
Other DVE45B6300W procedures
- How to clean the lint filterBefore or after every load, to prevent a risk of fire. The Filter Check icon appears after every load as a reminder.
- How to run the vent blockage testAfter installing the dryer, to check that the duct system is installed properly. The test must run when the dryer is cool.
Sources
- User manual, Dryer DVE(G)45B6300*. Samsung Electronics America, Inc. Document DC68-04299K-00, revision 00, 64 pages, en. downloadcenter.samsung.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.