Miele G 7200 the display stays dark and the Start indicator light is not flashing after switching on
Cause 1 of 2The dishwasher is not plugged in. Source: Problem solving guide: Technical problems, p. 78
First checkInsert the plug and switch on at the socket.
Causes and checks
The dishwasher is not plugged in. Source: Problem solving guide: Technical problems, p. 78
- Insert the plug and switch on at the socket.
The mains fuse has tripped. Source: Problem solving guide: Technical problems, p. 78
Licensed electrician Reset the trip switch in the fuse box or replace the fuse in the plug; the data plate gives the minimum fuse rating.Miele Customer Service Department If the mains fuse trips again, contact the Miele Customer Service Department. Contact: 0330 160 6600 or miele.co.uk.
All 2 causes checked. Contact Miele Customer Service Department: 0330 160 6600.
Service
If the checks above do not clear it, contact Miele Customer Service Department: 0330 160 6600, miele.co.uk. United Kingdom. Source: Back cover: United Kingdom, p. 99
Other G 7200 problems
- The on/off button does not respond immediately or only responds after several pressesEnergy management: the door was opened or closed shortly before the button was pressed, so the dishwasher was already switched on and its electronic module needs a few seconds to be ready.
- The dishwasher stops during a programmeThe mains fuse has tripped. The display is dark and the dishwasher cannot be switched on.
- The indicator lights and the display are darkThe dishwasher has switched off automatically to save energy.
- Water remains in the wash cabinet at the end of a programme3 causes in the manual. First: the filter combination in the wash cabinet is clogged.
- Detergent residue is left in the detergent compartmentThe detergent compartment was still damp when detergent was added.
- The detergent compartment lid cannot be closedResidual detergent is blocking the catch.
- Odours build up in the wash cabinetFrequent use of low-temperature wash programmes (below 50 °C) increases the risk of contamination and odours inside the wash cabinet.
- Knocking noise in the wash cabinetA spray arm is knocking against a wash item.
- Rattling noise in the wash cabinet2 causes in the manual. First: wash items are insecure in the wash cabinet.
- Knocking noise in the water pipesThis may be caused by the on-site installation or the cross-section of the piping. It does not affect the functioning of the dishwasher.
Sources
- Operating instructions, Dishwashers G 7200, G 7202, G 7205, G 7207. Miele & Cie. KG. Document M.-Nr. 11 952 311, revision / 01, HG07, en-GB, 100 pages, en-GB. media.miele.com (PDF). Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.