Levoit core 600s filter
When the Check Filter Indicator lights and the filter is clogged, noisy or loses airflow, or every 6 to 12 months.
Steps
- Unplug the air purifier.
- Turn the air purifier over or onto its side and remove the filter cover.
- Remove the old filter.
- Vacuum any remaining dust or hair from inside the air purifier with a vacuum hose.
- If you remove and set aside the top half of the air purifier, you can use water to clean the bottom half. Do not use water or liquids on the top half.
- Unwrap the new filter and place it in the housing.
- Replace the cover and plug in the air purifier.
- Reset the Check Filter Indicator. See Reset the Check Filter Indicator.
Source: Care & Maintenance (cont.) Source: Care & Maintenance (cont.), p. 17
Used for
- Check Filter Indicator: A reminder to check the filter. It lights after about 6 to 12 months at 24 hours of daily use; with less use it takes longer.
- Air purifier makes an unusual noise while the fan is on
- Poor air purification quality
Other Core 600S procedures
- How to reset the Check Filter IndicatorAfter replacing the filter while the indicator is lit, or after replacing it before the indicator lit.
- How to clean the pre-filterEvery 2 to 4 weeks.
- How to clean the AirSight Plus Laser Dust SensorEvery 3 months, or when the air quality ring stays red. More often in a dusty environment.
- How to disconnect from Wi-Fi and restore defaultsTo restore the purifier's default settings and disconnect it from the VeSync app.
- How to turn Light Detection on or offLight Detection is off by default.
Sources
- User Manual, Core 600S-P smart air purifier (Core 600S series). Arovast Corporation. Document HEAPAPLVSUS0091A, revision A2-241014, 28 pages, en-US. levoit.com (PDF). Listed on the manufacturer's support page. Retrieved 13 November 2026.
Page numbers are the numbers printed in the manual. Where this page and the manual differ, follow the manual.